AMI KHLFL204-12 Mounted Units & Inserts

B:0.8750 in; D:6.5000 in; Fillet Radius rb:0.040 in; Basic Dynamic Radial Load Rating C:63700 N; d:4.750 in; Basic Static Radial Load Rating Co:76500 N; Grease Speed Rating n1:3600 rpm; Fillet Radius ra:0.08 in; Oil Speed Rating n2:6000 rpm;

Sealed Speed Rating n3:10000 rpm; Grease Speed Rating Open/Shielded n1:16000 rpm; D:42.0000 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; Accessories:Two Shields; B:9.00 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:6630 N; d:25.000 mm; Basic Static Radial Load Rating Co:4150 N

Eye bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:4284.4 N·m; P150°:222 kN; h:73.025 mm; Stabilizing ring:2 x A8819; Pa:89 kN; Ca:147.803 mm; A1:228.6 mm; P180°:267 kN; Max. speed for PosiTrac Plus seal:575 r/min;

Recommended grub screw tightening torque:18 N·m; Mass lock nut:0.48 kg; b:8 mm; Axial static load carrying capacity:173 kN; Associated spanner:HN 16; h:3.5 mm; d3:105 mm; B3:3 mm; Grub (set) screw size:M8; d1:91.5 mm;

Reference speed:190 r/min; Basic static load rating C0:18300 kN; Da max.:735 mm; Limiting speed:380 r/min; d1:845 mm; r1,2 min.:4 mm; D1:715 mm; Mass bearing:155 kg; D:850 mm; H:112 mm;

b:6 mm; Axial static load carrying capacity:91.5 kN; Mass lock nut:0.19 kg; d1:61.5 mm; d3:70 mm; Recommended grub screw tightening torque:8 N·m; Associated spanner:HN 10-11; G:M 50x1.5; B:14 mm; h:2.5 mm;

Limiting speed:3000 r/min; d1 ≈:95 mm; r3,4 min.:0.6 mm; rb max.:0.5 mm; Calculation factor kr:0.3; d:80 mm; Fatigue load limit Pu:29 kN; D1 ≈:111 mm; Calculation factor e:0.3; ra max.:1 mm;

D:160 mm; C:14 mm; Basic dynamic load rating C:125 kN; H1:45 mm; s:65 mm; D3:165 mm; Basic static load rating C0:365 kN; H:40.2 mm; Minimum load factor A:0.79; d1 ≈:160 mm;

r3,4 min.:3 mm; Design variant/feature:BC4.10/W33WI; Basic static load rating C0:19300 kN; r1,2 min.:12 mm; F:528 mm; Calculation factor kr:570; D1 ≈:620.7 mm; B:420 mm; D:680 mm; K:9 mm;

A2:254 mm; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; ba:75.406 mm; N1:28.575 mm; Pa:46.3 kN; A1:180.975 mm; h:60.325 mm; Cap bolt:1-8 UNC; P150°:173 kN;

Limiting speed:2200 r/min; Reference speed:1100 r/min; Mass roller and cage thrust assembly:0.93 kg; Eb:146 mm; Shaft washer:WS 89317; Dw:12 mm; Ea:93 mm; Basic dynamic load rating C:255 kN; Roller and cage thrust assembly:K 89317 M; D:150 mm;

G2:G 1/4; B1:355 mm; Hydraulic nut:HMV 126 E; B2:369 mm; Nut for removal:HM 31/630; G1:55 mm; Mass withdrawal sleeve:120 kg; d1:570 mm; G:Tr 630x6; A:11 mm;

Grease Speed Rating n1:6000 rpm; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; B:30.20 mm; d:35.000 mm; Basic Static Radial Load Rating Co:36500 N;

B:24 mm; Mass housing washer:9.21 kg; r1,2 min.:2.1 mm; D:380 mm; D1:284 mm;

Reference speed:2000 r/min; b1:5 mm; da min.:106 mm; Mass bearing:1.95 kg; Basic dynamic load rating C:209 kN; Basic static load rating C0:400 kN; d1 ≈:116.5 mm; d:100 mm; K:3.5 mm; ra max.:1 mm;